About lighting, Article, Guide, Installation, recessed, Solution

Installing Recessed Lights Like a Pro [2024 Edition]

Installing Recessed Lights Like a Pro [2024 Edition]-About lighting--DALL·E 2023 12 27 17.00.19 An illustrated step by step graphic art guide on how to install recessed lights. The image should show tools, electrical components, a cut out section

Are you puzzled by the complexity of installing recessed lighting? This comprehensive guide unlocks the secrets to enhancing your space with elegant lighting solutions. Delve into the intricacies of choosing the right lights, cutting precise holes, and wiring safely. Discover how to revamp your space with this DIY project, reaping benefits of improved ambiance and potentially increased home value. Prepare to illuminate your understanding and your home!

What You Need to Know Before Installing Recessed Lighting

Before you start cutting holes in your ceiling, there are some important things you need to know about recessed lighting, such as:

  • The types of recessed lights and how to choose the right ones for your space
  • The cost of recessed lighting installation and how to save money by doing it yourself
  • The codes and permits you need to follow and obtain for your project
  • The safety instructions you need to follow to avoid electrical shocks, fires, and injuries

How to Install Recessed Lighting in an Existing Circuit

If you have an existing circuit that powers a ceiling light or fan near the center of the room, you can use it to install recessed lighting. This will save you time and money, as you don’t need to run a new cable from the electric service panel. However, you need to make sure that the existing circuit can handle the additional load of the recessed lights and that the lights are placed a safe distance from the ceiling joists. Here are the steps to install recessed lighting in an existing circuit:

  • Turn off the power to the circuit and test it with a voltage tester
  • Remove the existing light fixture and disconnect the wires
  • Mark the locations of the recessed lights on the ceiling and cut the holes with a hole saw
  • Connect the wires to the junction boxes of the recessed lights and attach them to the ceiling drywall with spring-loaded clips
  • Plug the lights into the junction boxes and install them in place
  • Add the trim and install the light bulbs
  • Turn on the power and test the lights

How to Install Recessed Lighting in a New Circuit

If you don’t have an existing circuit that you can use for your recessed lighting, you need to run a new cable from the electric service panel to the switch and from the switch to the first recessed light in the series. This is a more complex and time-consuming task, and you may need to hire an electrician if you are not comfortable with wiring. Here are the steps to install recessed lighting in a new circuit:

  • Turn off the main power to the house and open the electric service panel
  • Install a new breaker and run a cable from the panel to the switch location
  • Run another cable from the switch to the first recessed light location
  • Mark the locations of the recessed lights on the ceiling and cut the holes with a hole saw
  • Connect the wires to the junction boxes of the recessed lights and attach them to the ceiling drywall with spring-loaded clips
  • Plug the lights into the junction boxes and install them in place
  • Add the trim and install the light bulbs
  • Turn on the main power and test the lights

Measuring

Before you start installing recessed lights, you need to measure your space carefully. Measuring is essential for installing recessed lights accurately and precisely, because it will help you determine how many lights you need, where to place them, and what size and shape of fixtures to use.

To measure your space, you will need some tools and methods, such as:

  • A tape measure, to measure the length and width of the room, the height of the ceiling, and the distance between the joists.
  • A level, to ensure that your measurements are horizontal and vertical.
  • A stud finder, to locate the joists and avoid drilling into them.
  • A graph paper, to draw a scale diagram of your room and plan the layout of your lights.
  • A pencil and a ruler, to mark the locations of your lights on the ceiling.

Here are some instructions on how to measure your space for recessed lights:

  1. Measure the length and width of the room, and multiply them to get the area. For example, if your room is 12 feet by 15 feet, the area is 180 square feet.
  2. Divide the area by the desired light output per square foot, to get the total light output needed for the room. The light output is measured in lumens, and the recommended amount varies depending on the type and purpose of the room. For example, if you want to install recessed lights in a kitchen, you may need about 50 lumens per square foot, so the total light output needed is 180 x 50 = 9000 lumens.
  3. Divide the total light output by the light output of each fixture, to get the number of lights needed for the room. The light output of each fixture is also measured in lumens, and it depends on the type and wattage of the bulb. For example, if you want to use LED bulbs that have a light output of 800 lumens each, you will need 9000 / 800 = 11.25 lights, which you can round up to 12 lights.
  4. Measure the height of the ceiling, and use it to determine the size and shape of the fixtures. The size and shape of the fixtures affect the beam angle and spread of the light. The beam angle is the angle at which the light is emitted from the fixture, and the spread is the diameter of the circle of light on the floor. Generally, the higher the ceiling, the larger and wider the fixture you need. For example, if your ceiling is 8 feet high, you may use 4-inch round fixtures that have a beam angle of 40 degrees and a spread of 5 feet. If your ceiling is 10 feet high, you may use 6-inch round fixtures that have a beam angle of 60 degrees and a spread of 7.5 feet.
  5. Measure the distance between the joists, and use it to determine the placement of the fixtures. The joists are the horizontal beams that support the ceiling, and they are usually spaced 16 or 24 inches apart. You need to avoid drilling into the joists, and install the fixtures between them. For example, if your joists are 16 inches apart, you may place the fixtures 8 inches away from the center of each joist.
  6. Draw a scale diagram of your room on the graph paper, and mark the locations of the fixtures on the ceiling. You can use a ruler and a pencil to draw the lines and circles, and make sure they are evenly spaced and aligned. You can also use a compass or a protractor to measure the angles and distances. For example, if you want to install 12 lights in a 12 by 15 feet room, you may divide the room into four equal sections, and place three lights in each section. You may also leave some space between the lights and the walls, to avoid creating shadows and glare.
  7. Transfer the locations of the fixtures from the graph paper to the ceiling, using a tape measure, a level, and a pencil. You can use a ladder or a stool to reach the ceiling, and mark the center of each fixture with a pencil. You can also use a level to make sure the marks are horizontal and vertical.

How to Cut a Hole in the Ceiling for Recessed Lighting

Recessed lighting, also known as can lights, is a popular choice for modern homes. It provides a sleek and elegant look, as well as ample illumination for any room. However, installing recessed lighting requires some planning and preparation, especially when it comes to cutting holes in the ceiling. In this section, we will explain how to cut a hole in the ceiling for recessed lighting using different methods, such as drywall saws, hole saws, and jigsaws. We will also provide some safety precautions that you should follow when cutting holes in the ceiling, such as wearing protective gear, turning off the power at the circuit breaker, and securing the edges of the hole with drywall tape. Finally, we will include some images or videos that show how to cut a hole in different types of ceilings, such as wood-framed ceilings, metal-framed ceilings, and concrete ceilings.

Cutting a Hole with a Drywall Saw

A drywall saw is a simple and inexpensive tool that can be used to cut a hole in the ceiling for recessed lighting. A drywall saw has a sharp blade with serrated teeth that can easily cut through drywall or plaster. To use a drywall saw, you will need to measure the dimensions of the light fixture and draw a template on the ceiling. Then, you will need to use the drywall saw to cut out the hole along the template. Make sure to cut on the inside of the lines so that the hole is the correct size. Once the hole is cut, you will need to use a drywall saw to cut the drywall around the hole. Here is an image that shows how to use a drywall saw to cut a hole in the ceiling for recessed lighting:

A drywall saw is a good option for cutting a hole in the ceiling for recessed lighting if you have a relatively thin and smooth ceiling material. However, a drywall saw can be difficult to use if you have a thick or textured ceiling material, such as popcorn ceiling or plaster ceiling. A drywall saw can also create a lot of dust and debris, which can be messy and hazardous. Therefore, you should always wear protective gear, such as goggles, gloves, and a mask, when using a drywall saw. You should also cover the floor and furniture with drop cloths to catch the dust and debris.

Cutting a Hole with a Hole Saw

A hole saw is another tool that can be used to cut a hole in the ceiling for recessed lighting. A hole saw is a circular blade that attaches to a drill and can cut a perfect circle in the ceiling. To use a hole saw, you will need to measure the diameter of the light fixture and select a hole saw that matches the size. Then, you will need to mark the center of the hole on the ceiling and drill a pilot hole with a smaller drill bit. Next, you will need to attach the hole saw to the drill and align it with the pilot hole. Then, you will need to drill the hole with the hole saw, applying steady pressure and speed. Once the hole is cut, you will need to remove the plug of the ceiling material from the hole saw. Here is a video that shows how to use a hole saw to cut a hole in the ceiling for recessed lighting:

A hole saw is a good option for cutting a hole in the ceiling for recessed lighting if you have a relatively thick and hard ceiling material, such as wood or metal. A hole saw can also create a clean and precise hole, which can make the installation easier and more professional. However, a hole saw can be expensive and require a powerful drill. A hole saw can also create a lot of noise and vibration, which can be annoying and dangerous. Therefore, you should always wear protective gear, such as earplugs, goggles, and gloves, when using a hole saw. You should also turn off the power at the circuit breaker before drilling the hole, as you may encounter electrical wires or pipes in the ceiling.

Cutting a Hole with a Jigsaw

A jigsaw is another tool that can be used to cut a hole in the ceiling for recessed lighting. A jigsaw is a handheld saw that can cut curves and shapes in the ceiling. To use a jigsaw, you will need to measure the dimensions of the light fixture and draw a template on the ceiling. Then, you will need to drill a starter hole with a drill bit near the edge of the template. Next, you will need to insert the jigsaw blade into the starter hole and cut along the template. Make sure to follow the lines carefully and avoid overcutting. Once the hole is cut, you will need to smooth the edges of the hole with sandpaper or a file. Here is an image that shows how to use a jigsaw to cut a hole in the ceiling for recessed lighting:

A jigsaw is a good option for cutting a hole in the ceiling for recessed lighting if you have a relatively soft and flexible ceiling material, such as drywall or plaster. A jigsaw can also create a custom and creative hole, which can add some personality and style to your room. However, a jigsaw can be tricky and time-consuming to use, as you have to cut the hole manually and carefully. A jigsaw can also create a lot of dust and debris, which can be messy and hazardous. Therefore, you should always wear protective gear, such as goggles, gloves, and a mask, when using a jigsaw. You should also cover the floor and furniture with drop cloths to catch the dust and debris.

Safety Precautions for Cutting Holes in the Ceiling

Cutting holes in the ceiling for recessed lighting can be a rewarding and satisfying project, but it can also be a risky and dangerous one. Therefore, you should always follow some safety precautions when cutting holes in the ceiling, such as:

  • Wear protective gear, such as goggles, gloves, earplugs, and a mask, to protect yourself from dust, debris, noise, and injury.
  • Turn off the power at the circuit breaker before drilling or cutting the hole, to avoid electrocution or fire.
  • Use a stud finder to locate the ceiling joists and avoid cutting through them, as they support the structure of the ceiling and the roof.
  • Use a wire detector to locate any electrical wires or pipes in the ceiling and avoid cutting through them, as they may cause shock, damage, or leakage.
  • Secure the edges of the hole with drywall tape, to prevent the ceiling material from cracking or falling.
  • Dispose of the dust and debris properly, to prevent inhalation, ingestion, or contamination.

Cutting a Hole in Different Types of Ceilings

Depending on the type of ceiling you have, you may need to use different methods or tools to cut a hole in the ceiling for recessed lighting. Here are some examples of how to cut a hole in different types of ceilings, such as wood-framed ceilings, metal-framed ceilings, and concrete ceilings:

  • Wood-framed ceilings: Wood-framed ceilings are made of wooden beams or planks that support the ceiling material. To cut a hole in a wood-framed ceiling, you can use a hole saw or a jigsaw, as they can easily cut through wood. However, you should avoid cutting through the wooden beams or planks, as they may weaken the structure of the ceiling. You should also use a drill bit that is suitable for wood, such as a spade bit or a forstner bit, to drill the starter hole or the pilot hole. Here is a video that shows how to cut a hole in a wood-framed ceiling for recessed lighting:

How to Cut Recessed Light Holes in Wood

  • Metal-framed ceilings: Metal-framed ceilings are made of metal studs or channels that support the ceiling material. To cut a hole in a metal-framed ceiling, you can use a hole saw or a jigsaw, as they can cut through metal. However, you should avoid cutting through the metal studs or channels, as they may damage the tool or the wiring. You should also use a drill bit that is suitable for metal, such as a high-speed steel bit or a cobalt bit, to drill the starter hole or the pilot hole. Here is an image that shows how to cut a hole in a metal-framed ceiling for recessed lighting:
  • Concrete ceilings: Concrete ceilings are made of solid concrete that forms the structure of the ceiling. To cut a hole in a concrete ceiling, you will need to use a special tool, such as a rotary hammer or a core drill, as they can drill through concrete. However, you should be careful not to drill too deep or too wide, as you may compromise the integrity of the ceiling. You should also use a drill bit that is suitable for concrete, such as a masonry bit or a diamond bit, to drill the hole.

How to Wire Your Recessed Lighting Installation

There are two main methods for wiring your recessed lighting installation: existing circuits or new circuits. Existing circuits are the ones that are already wired in your home or office, such as the main power supply or the switchboard. New circuits are the ones that are created by adding wires and outlets for each recessed light fixture.

Existing Circuits

If you have existing circuits in your home or office, you can use them to wire your recessed lighting installation. This method is simpler and cheaper than creating new circuits, but it also has some limitations. You can only use existing circuits that are not overloaded or damaged by other appliances or devices. You also need to make sure that the existing circuit has enough capacity for all the recessed lights you want to install.

To wire your recessed lights using existing circuits, you need to follow these steps:

  1. Turn off the power supply at the main breaker box or fuse panel.
  2. Locate the ceiling joists where you want to install the recessed lights.
  3. Use a stud finder or a metal detector to find any metal pipes or wires running through the ceiling joists.
  4. Mark the locations of the ceiling joists on a stud finder map.
  5. Cut out a hole in each ceiling joist where you want to install a recessed light fixture.
  6. Insert an IC-rated housing into each hole and secure it with screws.
  7. Attach an IC-rated trim around each housing and screw it in place.
  8. Insert an IC-rated lamp into each housing and screw it in place.
  9. Turn on the power supply at the main breaker box or fuse panel.
  10. Test each light by pressing the test button on the lamp or using a voltage tester.

New Circuits

If you don’t have existing circuits in your home or office, or if they are not suitable for wiring your recessed lighting installation, you need to create new circuits for each recessed light fixture. This method is more complex and expensive than wiring using existing circuits, but it also gives you more flexibility and control over your lighting system.

To wire your recessed lights using new circuits, you need to follow these steps:

  1. Turn off the power supply at the main breaker box or fuse panel.
  2. Locate an outlet near where you want to install a recessed light fixture.
  3. Use a voltage tester to check if there is power at that outlet.
  4. If there is no power at that outlet, run a new circuit from an existing circuit box (if available) or from an electrical panel (if not).
  5. Connect one end of a 14-gauge wire from one junction box (if available) or from an electrical panel (if not) to one terminal of an outlet near where you want to install a recessed light fixture.
  6. Connect another end of a 14-gauge wire from another junction box (if available) or from an electrical panel (if not) to another terminal of an outlet near where you want to install another recessed light fixture.
  7. Repeat steps 5 and 6 until all the outlets near where you want to install recessed lights are connected with wires.
  8. Turn on the power supply at the main breaker box or fuse panel.
  9. Test each light by pressing the test button on the lamp or using a voltage tester.

How to Mount Your Recessed Lighting Fixtures

Recessed lighting fixtures, also known as can lights, are a great way to add style and functionality to your home. They can create a cozy and inviting atmosphere, highlight architectural features, or provide task lighting for specific areas. However, installing recessed lighting can be tricky, especially if you have an existing ceiling. You need to choose the right type of housing, trim, and bulb for your project, and follow some safety precautions to avoid fire hazards and electrical shocks.

In this section, we will explain how to mount your recessed lighting fixtures using different methods, such as mounting brackets, screws, or nails. We will also provide some safety tips that you should follow when mounting your fixtures, such as making sure they are level and secure, using washers or spacers, and avoiding overloading wires. Finally, we will include some images or videos that show how to mount different types of fixtures, such as IC-rated fixtures or non-IC-rated fixtures.

Mounting Methods

There are different ways to mount your recessed lighting fixtures, depending on the type of housing you have and the condition of your ceiling. Here are some common mounting methods:

  • Mounting brackets: These are metal or plastic clips that attach to the housing and secure it to the ceiling joists or studs. They are usually adjustable and can fit different sizes of housings. Mounting brackets are often used for new construction housings, which are installed before the ceiling is finished. To use mounting brackets, you need to locate the ceiling joists or studs, mark the location of the holes for the fixtures, cut the holes with a hole saw, and attach the brackets to the housing. Then, you need to insert the housing into the hole and fasten the brackets to the joists or studs with screws or nails
  • Screws or nails: These are simple and inexpensive ways to mount your recessed lighting fixtures, especially if you have remodel housings, which are designed for installation in a pre-built ceiling. To use screws or nails, you need to mark the location of the holes for the fixtures, cut the holes with a hole saw, and insert the housing into the hole. Then, you need to drive screws or nails through the housing flange into the ceiling. Make sure the screws or nails are long enough to penetrate the ceiling material and hold the fixture securely
  • Spring clips: These are metal or plastic springs that attach to the housing and hold it in place by applying pressure to the ceiling. They are usually used for shallow ceiling housings, which are suitable for ceilings with limited space. To use spring clips, you need to mark the location of the holes for the fixtures, cut the holes with a hole saw, and insert the housing into the hole. Then, you need to push the spring clips into the housing until they snap into place. The spring clips will expand and grip the ceiling from inside the hole

Safety Precautions

When mounting your recessed lighting fixtures, you should follow some safety precautions to prevent fire hazards and electrical shocks. Here are some safety tips to keep in mind:

  • Turn off the power: Before you start any work, make sure you turn off the power to the circuit that you are working on. You can use a circuit tester to check if the power is off. Never work with circuits that are energized34
  • Use proper insulation: If you have insulation in your ceiling, you need to use recessed lighting fixtures that are rated for insulation contact (IC). These fixtures are designed to prevent heat transfer from the housing to the insulation, which can cause fires. Non-IC fixtures should not come in contact with insulation, and should have a clearance of at least 3 inches from any combustible material. You can also use airtight fixtures, which prevent air leakage and reduce energy loss.
  • Use proper bulbs: You should use bulbs that are compatible with your recessed lighting fixtures, and that do not exceed the maximum wattage rating of the fixture. Using higher wattage bulbs can cause overheating and fire hazards. You can also use LED bulbs, which are more energy-efficient and produce less heat than incandescent or halogen bulbs.
  • Use washers or spacers: If you are using screws or nails to mount your recessed lighting fixtures, you should use washers or spacers between the housing flange and the ceiling. This will prevent the housing from being pushed too far into the hole, which can damage the wiring or the ceiling material. Washers or spacers will also help to level the fixture and prevent it from sagging
  • Avoid overloading wires: You should not connect more recessed lighting fixtures to a circuit than it can handle. Overloading wires can cause overheating and fire hazards. You should consult an electrician to determine how much voltage your circuit can reliably carry, and how many fixtures you can safely install.

How to Add Trim Around Your Recessed Lighting Fixtures

Recessed lighting fixtures are a great way to brighten up your space and create a modern and elegant look. However, sometimes you may want to add some trim around your recessed lighting fixtures to enhance their appearance or direct the light in a certain way. In this article, I will explain how to add trim around your recessed lighting fixtures using different materials (e.g., wood trim, metal trim) and provide some tips on how to choose the right trim for your style and budget.

What is Trim?

Trim is the part of a recessed light that is visible to the naked eye. It is a decorative molding that shields the opening of the recessed light and gives it its aesthetic appeal. There are many types of trims available for recessed lighting, such as baffle trims, reflector trims, open trims, eyeball trims, gimbal trims, surface adjustable trims, slot aperture trims, pinhole trims, lensed trims, wall wash trims, and decorative trims. Each type of trim has its own advantages and disadvantages depending on the size, shape, color, finish, and function of the recessed light.

How to Add Trim Around Your Recessed Lighting Fixtures

Adding trim around your recessed lighting fixtures is not very difficult if you have some basic tools and skills. However, before you start cutting or drilling any wood or metal pieces for your trim, you should make sure that they are compatible with your existing housing and lamp. You should also check the local codes and regulations in your area regarding electrical wiring and safety precautions.

Here are some general steps on how to add trim around your recessed lighting fixtures:

  1. Measure the dimensions of your existing housing and lamp carefully. You will need these measurements to determine how much material you need for your trim.
  2. Choose the type of trim that suits your style and purpose. You can browse online or visit a local hardware store for more options and inspiration.
  3. Cut or drill the material according to your measurements using a saw or a drill machine. Make sure that you follow the instructions carefully and wear protective gear such as gloves, goggles, mask, etc.
  4. Attach the material to the housing using screws or nails depending on whether it is flanged or flangeless. Flanged trims have metal tabs that fit into slots on the housing while flangeless trims have smooth edges that fit into grooves on the housing.
  5. Secure the material with clamps or tape until it dries completely.
  6. Test the functionality of your new trim by turning on the switch and checking if there are any loose wires or gaps.

What Material Should You Use for Your Trim?

The material that you use for your trim depends on several factors such as your budget, preference, durability, maintenance level, etc. Here are some pros and cons of different materials that you can consider:

  • Wood: Wood is a natural and warm material that can create a cozy and rustic look for your space. However, wood can also be expensive, prone to warping, susceptible to moisture damage, difficult to clean, etc.
  • Metal: Metal is a durable and versatile material that can create a sleek and modern look for your space. However, metal can also be noisy, prone to rusting, susceptible to heat damage, difficult to paint, etc.

How Much Does It Cost To Add Trim Around Your Recessed Lighting Fixtures?

The cost of adding trim around your recessed lighting fixtures depends on several factors such as:

  • The type of trim that you choose
  • The amount of material that you need
  • The labor charges if you hire someone else
  • The location where you live

According to HomeAdvisor.com, an average cost of adding 1/4 inch wood molding around an existing baseboard costs $1-$3 per linear foot while an average cost of adding 1/4 inch metal molding costs $0-$2 per linear foot.

Therefore,

  • If you use wood molding with 1/4 inch thickness (0.25 inches), it will cost between $0-$0 per linear foot ($0-$0).
  • If you use metal molding with 1/4 inch thickness (0.25 inches), it will cost between $0-$2 per linear foot ($0-$2).

These costs do not include other expenses such as tools, materials, labor, etc.

You may want to get several quotes from different contractors before you decide to add trim around your recessed lighting fixtures. You can also watch some YouTube videos to get some ideas and tips on how to do it yourself

Tips and Tricks for Recessed Lighting Installation

Recessed lighting installation can be a DIY project, but it requires some skills and tools. Here are some tips and tricks to make the process easier and safer:

  • Wear safety glasses, gloves, and a dust mask when cutting the ceiling and handling the wires.
  • Use a drill with a clutch to avoid stripping the screws or damaging the fixture.
  • Use a level to make sure the lights are aligned and straight.
  • Use a stud finder to locate the joists and avoid cutting into them.
  • Use a voltage tester to check the wires before touching them.
  • Use a circuit tracer to identify the circuit that powers the lights and turn it off.
  • Use a wire stripper to strip the wires to the right length and expose the copper ends.
  • Use a wire nut spinner to tighten the wire nuts faster and easier.
  • Use a fish tape or a coat hanger to pull the cable through the ceiling.
  • Use a hole saw or a jigsaw to cut the holes for the fixtures.
  • Use a template or a cardboard cutout to trace the outline of the fixture on the ceiling.
  • Use a drywall saw to cut out the outline of the fixture on the ceiling.
  • Use a jigsaw to cut out a larger hole for new-construction lights.
  • Use a hammer and nails or a drill and screws to secure the junction box or the mounting bracket to the joist.
  • Use a screwdriver to adjust the height of the fixture or the trim ring.
  • Use a dimmer switch to control the brightness and mood of the lights.

How Kosoom Goes Above and Beyond in Helping You with Questions About LED Lights and Installation

When it comes to understanding how recessed lights are installed, Kosoom, an Italian lighting brand with 20 years of experience in the commercial lighting industry, stands out as a valuable resource. Here’s how Kosoom goes above and beyond other brands to provide assistance and information on this subject.

Who We Are

Kosoom is a reputable Italian lighting brand specializing in commercial lighting. With our headquarters located in Milan, Italy, we have established ourselves as leaders in the industry with a strong presence and continuous growth in offline operations throughout Europe. Our annual GMV (Gross Merchandise Value) in Europe exceeds 40 million USD, and we have a vast network of factories, warehouses, and showrooms, covering over 8000 square meters.

We take pride in our dedicated workforce of over 1000 employees, as well as our extensive physical store presence across Europe, enabling us to provide exceptional service to our customers. Kosoom operates both online and offline, with products directly shipped within Europe to cater to various commercial lighting needs.

Our Advantages in Helping You with LED Lighting Questions

Compared to other brands, Kosoom excels in several ways when it comes to assisting you with LED lighting queries and concerns:

1. Cost-Effectiveness: Kosoom has a robust supply chain, allowing us to offer wholesale prices that are often 1/2 or even 1/3 of the market price by using Kosoom “DirectLightSaver Hub” System. We prioritize affordability and offer astonishingly competitive prices on products like integrated power LED track lights and LED profiles.

2. Free Lighting Solutions: While many brands charge for lighting solutions, Kosoom provides them for free. We believe in supporting our customers with expert advice without added costs.

3. Local Presence: With a large-scale offline team in Europe, we fulfill European orders directly from our Italian base. This presence allows us to offer top-notch solutions and after-sales service to our European customers.

4. In-House Manufacturing: Kosoom owns its factory, ensuring that all the lights we sell are produced in-house. This guarantees quality control and allows us to provide OEM services upon customer request.

5. Certified and Guaranteed: We have obtained all certifications related to LED lights in Europe, meeting international standards such as CE and ROHS. Additionally, we offer a 3-5 year warranty on our products, backed by rigorous quality inspections at every step of the manufacturing process.

6. Professional R&D: Our team of over 100 research and development professionals, including senior lighting engineers and designers, ensures that our products meet international first-class standards. We invest heavily in R&D resources and talent development.

7. Global Production Bases: With 8 production bases worldwide, we maintain high manufacturing standards using first-class international automated production lines and world-class equipment.

8. Renowned Suppliers: We have deep cooperative relationships with globally recognized brands like Bridgelux and Osram, ensuring the quality of our products.

9. Quality Laboratory: Kosoom’s national-level quality laboratory includes comprehensive testing rooms, ensuring that our products meet stringent quality standards.

10. Rigorous Quality Inspection: Our quality inspection process is thorough, covering appearance, electrical and optical performance, lifespan, environmental adaptability, and safety, to ensure that every customer receives a perfect product.

When it comes to understanding how recessed lights are installed or any other question related to LED lighting, Kosoom is your trusted partner. We offer unmatched service, cost-effectiveness, and expertise to help you make informed decisions and achieve your lighting goals. Visit our dedicated UK website, kosoom.uk, for more information and assistance with your LED lighting needs.

Shop Kosoom Cheap LED Lights – The lowest price in the world

https://www.kosoom.uk/c/cheap-led-lights/

Now that you’ve mastered the art of recessed lighting installation, why not share your newfound knowledge? Dive into the DIY community by leaving comments or sharing your experience on social media. If questions loom or you’ve got suggestions for our guide, we’re eager to hear! Your feedback lights the way for future improvements and helps others brighten their homes​​.

FAQ

How are recessed lights placed in a room?

Recessed lights are strategically placed for even illumination, often in a symmetrical pattern. Placement depends on room size, ceiling height, and desired lighting effect, with careful consideration to avoid shadows and create a balanced aesthetic.

How are recessed lights connected?

Recessed lights are connected through electrical wiring to a power source, typically involving a series circuit from one light to the next. Each fixture is wired to the main circuit and controlled by a switch, often requiring a junction box for connections.

Can you install recessed lighting in an existing ceiling?

Yes, recessed lighting can be installed in an existing ceiling by cutting holes for the light housings, routing wiring, and ensuring proper support. It’s important to check for obstructions and follow electrical codes for safety.

How does recessed lighting stay in place?

Recessed lighting stays in place using clips or adjustable springs that secure the fixture to the ceiling. Once inserted into the cutout, these elements expand or tighten against the sides, providing a firm hold and flush finish with the ceiling surface.

What is the difference between can lights and recessed lights?

Can lights and recessed lights are essentially the same; “can” refers to the housing’s shape, while “recessed” describes the installation style. Both terms denote fixtures installed into the ceiling, providing a sleek, flush look with directed illumination.

More article about recessed light

author-avatar

About Gilbert

Our email: [email protected] Dear readers of Kosoom.uk! I am delighted to introduce myself as Gilbert, your dedicated source of enlightenment when it comes to LED lights. If you have questions about any LED lights, please feel free to contact us to our email: [email protected] We will give you a satisfactory answer as soon as possible. Hailing from the heart of England, I bring to you a wealth of professional expertise and a passion for all things LED. As an Englishman with a fervent interest in illumination technology, I have made it my mission to illuminate the path to understanding LED lights, tailored especially for the inquisitive minds of Britain. With a background steeped in the intricacies of LED technology, I stand ready to shed light on every facet of this brilliant innovation. Through my articles, I intend to guide you through the captivating world of LED lights, providing you with insights that not only unravel the science behind these luminous marvels but also highlight their practical applications and benefits in the UK context. In collaboration with Kosoom, I embark on this journey to demystify LED lights for you. Whether you're curious about the evolution of LED technology, eager to decipher the nuances of LED color temperatures, or seeking advice on optimizing lighting choices for your home, workplace, or public spaces, I am your trusted companion. My articles will offer you clear, concise, and expertly-crafted explanations that bridge the gap between complex technical jargon and approachable, relatable understanding. Stay tuned for a series of articles that will not only elevate your understanding but also brighten up your perspectives on the art and science of lighting.

Related Posts